View ECNT-20-30000M-GA_4196145.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Marketing Bulletin
DATE: TO: FROM: RE: May 1st, 2008 All Sales Personnel Isaac Gonzalez Product Termination
To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series EC Description Resistance Welded HC-49/U Crystal Recommended Replacement EU Series
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez Configuration Manager Ecliptek Corporation
3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234
EC Series
* HC-49/U package * AT cut * Resistance weld seal * Tight tolerance/stability * Tape and reel, vinyl sleeve, insulator tab, third lead, and custom lead length options available NOTES
EC
H 13.58 L 11.18 W 4.70
CRYSTAL
_____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
1.8432MHz to 65.000MHz
_____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL)
50ppm / 100ppm (Standard), 30ppm / 50ppm, 15ppm / 30ppm, *15ppm / 20ppm, or 10ppm / 15ppm 0C to 70C (Standard), -20C to 70C, or -40C to 85C 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 2 mWatts Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Frequency Range 1.8432MHz to 1.999MHz 2.000MHz to 2.399MHz 2.400MHz to 2.999MHz 3.000MHz to 3.199MHz 3.200MHz to 3.499MHz 3.500MHz to 3.599MHz 3.600MHz to 3.899MHz 3.900MHz to 3.999MHz 4.000MHz to 4.099MHz
MANUFACTURER
ESR () 650 Max 550 Max 350 Max 250 Max 200 Max 180 Max 150 Max 120 Max 100 Max
CATEGORY
Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT
SERIES
Frequency Range 4.100MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 6.999MHz 7.000MHz to 7.999MHz 8.000MHz to 9.999MHz 10.000MHz to 12.999MHz 13.000MHz to 32.768MHz 24.000MHz to 29.999MHz 30.000MHz to 65.000MHz
PACKAGE
ESR () 80 Max 75 Max 50 Max 40 Max 35 Max 30 Max 25 Max 60 Max 40 Max
CLASS
Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Third Overtone / AT Third Overtone / AT
REV.DATE
ECLIPTEK CORP.
CRYSTAL
EC
HC-49/U
CR05
11/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE EC A T - 20 - 30.000M - G TR
FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Standard), CLXXX=Custom Lead Length(pp46) G=Gull Wing, G3=Gull Wing & Metal Jacket (pp47) I2=Insulator Tab (pp48) L=Third Lead(pp48) L2=Alternate Third Lead (pp48) V=Vinyl Sleeving (pp48) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series, XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, T=Third Overtone / AT
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
OBSOLETE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER SPECIFICATION
MARKING SPECIFICATIONS
1000 Pieces per Reel Compliant to EIA-468B
Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents
MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215
Line 1: ECLIPTEK Line 2: E XX.XXXM
Frequency in MHz (5 Digits Maximum + Decimal) E or Blank (No Marking)
Line 3: XX
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
REV.DATE
ECLIPTEK CORP.
CRYSTAL
EC
HC-49/U
CR05
11/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.

▲Up To Search▲

Price & Availability of ECNT-20-30000M-GA

	To Download ECNT-20-30000M-GA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .